Electrode - The site, area or location at which electrochemical processes take place.
Capacity Retention (or Charge Retention) - The fraction of the full capacity available from a battery under specified conditions of discharge after it has been stored for a period of time.
Fourier theorem - Theorem stating that any non-sinusoidal periodic function (frequency f) may be represented as a sum of terms (series) made up of - n a sinusoidal term with frequency f, called the fundamental frequency, n sinusoidal terms with frequencies that are whole multiples of the fundamental frequency, (harmonics), n a possible DC component where n is a whole number. n = 1 corresponds to the fundamental, n > 1 to the harmonic of the nth order.
Wall-less Design - A battery design where the structural support for the cells is formed by an open plastic framework.
RS485 (Recommended standard RS485) - This standard is similar to RS422A except that the number of possible links is greater and up to 32 senders may be interconnected to as many receivers. This system is particularly designed for local-area networks.
RS232C (Recommended standard RS232C) - Standard defining the communication circuits between devices for synchronous and asynchronous transmissions on the following types of lines - two-wire, four-wire, point-to-point, telephone lines and local links with short cables. Though the standard covers only transmissions over distances up to 15 meters, it is often possible to ensure correct transmission over greater distances using high-quality shielded cable in a reasonably satisfactory electrical environment. Most terminals and devices on the market can implement this transmission standard.
Constant Power Discharge - A battery discharge regime whereby the current during the discharge increases as the battery voltage decreases.
