RS485 (Recommended standard RS485) - This standard is similar to RS422A except that the number of possible links is greater and up to 32 senders may be interconnected to as many receivers. This system is particularly designed for local-area networks.
Electrolyte - The medium which provides the ion transport mechanism between the positive and negative electrodes of a cell.
Top-Up Charge - A low rate charge following the main charge, designed to ensure maximum capacity.
Load power - Apparent power Pu that the UPS inverter supplies under given load conditions. It is less than or equal to the rated output Pn. The ratio Pu/Pn defines the % load of the inverter.
Current (float) - DC current that maintains the battery at nominal charge, corresponding the float voltage. This current compensates open circuit losses.
UPS (parallel without redundancy) - A UPS made up of several (n) parallel-connected UPS units with equal output ratings (P) and each equipped with its battery, for large loads. The total output is equal to the number of units multiplied by their individual output (n x P). In this configuration, no UPS unit is redundant.
Harmonics (current and voltage) - All alternating current which is not absolutely sinusoidal is made up of a fundamental and a certain number of current harmonics which are the cause of its deformation (distortion) when compared to the theoretical sine-wave. For each current harmonic of order n and an rms value In, there is a voltage harmonic with an rms value Un. If Zsn is the voltage source output impedance for the harmonic of the nth order, then - Un = Zsn x In
