Capacity Retention (or Charge Retention) - The fraction of the full capacity available from a battery under specified conditions of discharge after it has been stored for a period of time.
UL - Underwriters Laboratories (UL) is a non-governmental, non-profit certification organization in the United States in which not only government authorities are represented, but also consumer groups, "export" services, research, etc. Following certification, a product may bear the UL label.
Ambient Humidity - The average humidity of the surroundings.
Redundancy (standby) - UPS configuration in which one or several UPS units operate on stand-by, with no load or only a partial load, and can immediately back up a faulty UPS unit by no-break transfer of the load, carried out by a static switch.
Protection index (IP) - Index indicating the capacity of an electrical device to resist environment conditions. It is made up of three digits (e.g. IP 205), each corresponding to a type of environmental risk. The higher the number, the greater the capacity to resist. First digit (0 to 6) - capacity to resist penetration by solid objects. Second digit (0 to 7) - capacity to resist penetration by liquids. Third digit (0, 1, 2, 3, 5, 7, 9) - mechanical strength.
Energy Density - The ratio of the energy available from a battery to its volume (Wh/L) or weight (Wh/kg).
PWM (Pulse Width Modulation) - Inverter high-frequency chopping technique using a means of regulation enabling rapid modification of pulse widths over a single period, thus making it possible to maintain the inverter output within tolerances even for non-linear loads.
