RS422A (Recommended standard RS422A) - Standard RS232C is sufficient for transmissions in a normal environment. For transmissions in a disturbed environment or over long distances, standard RS422A offers a differential operation option, with a balanced voltage, ensuring far superior performance. What is more, it can be used for multipoint links, with generally up to ten connection points (one sender and up to ten receivers).
Load (non-linear) - Load (generally with a switched-mode power supply) generating major harmonic currents. Current wave form is different from voltage wave form. Ohm's law is not applicable. It can be used only with each harmonic.
Blackout - A zero voltage condition lasting for more than two cycles. Same as a power failure
Earthing system IT - Earthing system in which the neutral is isolated from the earth or connected to the earth via a high impedance and the various exposed conductive parts are connected to the earth via individual earthing circuits. An alarm must signal the appearance of a first insulation fault. The installation must be de-energized immediately in the event of a second insulation fault.
MTBF (Mean Time Between Failures) - Mathematical calculation of the duration of normal operation of a repairable device between failures. The product, expressed in hours, is an indication on the reliability of the device.
Positive Temperature Coefficient (PTC) - A thermally reactive device which becomes highly resistive at a specific temperature or current.
Brownout - A steady state RMS voltage under nominal by relatively constant percentage.
