Depth of Discharge - The ratio of the quantity of electricity (usually in ampere-hours) removed from a battery to its rated capacity.
RS232C (Recommended standard RS232C) - Standard defining the communication circuits between devices for synchronous and asynchronous transmissions on the following types of lines - two-wire, four-wire, point-to-point, telephone lines and local links with short cables. Though the standard covers only transmissions over distances up to 15 meters, it is often possible to ensure correct transmission over greater distances using high-quality shielded cable in a reasonably satisfactory electrical environment. Most terminals and devices on the market can implement this transmission standard.
E-Rate - Discharge or charge power, in watts, expressed as a multiple of the rated capacity of a cell or battery which is expressed in watt-hours. For example, the E/10 rate for a cell or battery rated at 17.3 watt-hours is 1.73 watts. (This is similar to the method for calculating C-Rate.)
Distortion (total) - Ratio between the rms value of all harmonics of a non-sinusoidal alternating periodic value and that of the fundamental. This value may also be expressed as a function of the individual distortion of each harmonic Hn= Yn /Y1.
Ambient Humidity - The average humidity of the surroundings.
Shelf Life - The duration of storage under specified conditions at the end of which the battery still retains the ability to give a specified performance.
Continuous Test - A test in which a battery is discharged to a prescribed end point voltage without interruption.
