Electrochemical Equivalent - Weight of a substance that is deposited at an electrode when the quantity of electricity which is passed is one coulomb.
Frequency Variation - A change in frequency of more than 3 Hz.
Load power - Apparent power Pu that the UPS inverter supplies under given load conditions. It is less than or equal to the rated output Pn. The ratio Pu/Pn defines the % load of the inverter.
RS485 (Recommended standard RS485) - This standard is similar to RS422A except that the number of possible links is greater and up to 32 senders may be interconnected to as many receivers. This system is particularly designed for local-area networks.
Rectifier/charger - UPS component that draws on the mains the power required to supply the inverter and to float charge or recharge the battery. The alternating input current is rectified and then distributed to the inverter and the battery.
Power source (alternate) - Backup source used in the event of a mains failure. The connection time and the duration of the source depend on the type of source used. (back)
RS232C (Recommended standard RS232C) - Standard defining the communication circuits between devices for synchronous and asynchronous transmissions on the following types of lines - two-wire, four-wire, point-to-point, telephone lines and local links with short cables. Though the standard covers only transmissions over distances up to 15 meters, it is often possible to ensure correct transmission over greater distances using high-quality shielded cable in a reasonably satisfactory electrical environment. Most terminals and devices on the market can implement this transmission standard.
